Suspension clamps are mainly used for overhead power lines or substations, to fix the wires on the insulator string, and hang the wires on the insulators or the lightning wires on the tower by connecting the fittings. The body material of the suspension c
Wall covering bamboo wall panel offer high architectural performance with a modern linear clean style available in a variety of profile, stains, sizes, and non-flat surfaces.
Half tooth section high efficiency concrete pdc core drill bits for hard rock.Suitable for limestone, dolomite, due to bit diamond cutting, staggered inside and outside, drilling speed.
The GT Vibrator creating the vibration force by the positive and negative unbalanced torque on the wheel, the wheel is supported by the fully enclosed ball shaft which is pre-lubricated, the bearing contains special lubrication grease which ensures long l
(1)15 seats Jinbei H1 with power steering,standard roof,gasoline.Displace ment 2.4L for gasoline.(2)Jinbei minibus with white color,dimension4970mm*1690mm*1935mm.
Close die forging body for kinds of valves, meters, pipelines and other equipments.Compare with the casting body, the quality of forging valve meter body is much better, the forged body is suitable for the high pressure valves.
Specially designed for bus AC unit with sub-engine, it has a start button to wake up the engine system for power supply. The other functions are same with common controller.
YSIQ10 series electric single seat control valve structure is top guiding.The advantage as below: 1.Compact structure 2.Small volume 3.Lighter 4.Sensitive action 5.S type Flow channel, low pressure drop loss, large circulation capacity,flow characteristic
The clamp hull and pressure plate are cast from high-strength aluminum alloy, without hanging plates, and the suspension point is located above the axis of the wire. This kind of clamp has high strength, light weight and low magnetic loss, and is suitabl
The hull and pressure plate of XGF aluminum alloy suspension clamp are cast from high-strength aluminum alloy, without hanging plates, and the suspension point is located above the axis of the wire.
Model: TW-GM12 SeriesClassification:Spur DC Gear MotorApplication:Automatic door lock, projector, hairdressing equipment,Etc Notes: The motors can be designed according to customer requirements
Established in 2002, one of the most competitive mould manufacturer and injection molding factory in Shanghai, China. Our mould and plastic injection moulding parts covers range of industrial, household application, auto parts, electronic, medical and aer
The pre-twisted suspension clamp is used to fix the wire on the insulator string of the linear pole or suspend the lightning protection wire on the linear pole. It can replace the XGU, XGF and other ship type suspension clamps widely used on the current l
Stainless steel has the characteristics of corrosion resistance and abrasion resistance, which is one of the most commonly used material used by engineers. The common models of the materials are: austenite, martensitic stainless steel with code of SUS304,