Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2020-08-25 22:17
484
Company Profile
Wenzhou Jingfei Plastic Machinery Co.,LtdBy certification [File Integrity]
Contact:jinfeijingchukou(Mr.)
Email:
Telephone:
Phone:
Area:Zhejiang
Address:Zhejiang
Website:http://www.plasthermoforming.com/ http://jinfeijingchukou.ffffhs.com/
Introduction
This kind of Automatic Four Station Thermoforming Machine is special designed for PP and PS PVC Film. This machine is suitable for any of thermoforms plastic sheet. It is mainly made up by four Parts: Forming the products, Punching, Cutting and Stacking the products. It is updated according to the mostly development technical, compare with the traditional machine, it can solve many impossible commitment. In addition, the Automatic Four Station Thermoforming machine can form and cut neatly and clearly. Cutting Off the product in order. It is also good for PET, PVC, etc. It is very popular with our customers all over the world because of long service life and high cost effective.
Specification:
Model |
550H(Up & down heater) |
Punch Frequency |
10-35punch/min |
Material |
PP/PS/PET/PVC/PLA |
Max. Forming Length |
350mm |
Max. Forming Width |
550mm |
Max. Forming depth |
70mm |
Upper and Lower Forming Power |
Top heater 43kw, bottom heater 41KW |
Total Power |
380V 50HZ 97KW Three-phase and four-wire |
Water Consumption |
0.3m³/h (Tap water or recycle water) |
Air Pressure |
0.5-0.8(mpa) |
Exhaust Volume |
≥0.6 m³/min |
Pressure of water supply |
0.2MPa |
Machine overall size(L×W×H) |
5000*1675×1900mm |
Area cost |
8700*3600 |
The maximum width of material |
580mm |
Weight |
5500KG |
Advantages:
1.Our company is a profession manufacture for Plastic Thermoforming Machine
2.Change the mold is easy and fast, the forming mold have motor control
3.Use the Servo motor driving the sheet,
4.15 inches Touch screen Control, easy for Operation
5.Forming, punching , cutting work independent , could move the distich on the rail .
6.Stacking use robot, could stack different size, and depth products.
7.Forming, and cutting control by separate servo motor.
Products comes out and Products in stacking
Inside layout of ware less
Samples display
http://www.plasthermoforming.com/
Top Type Breaker
price:Negotiable
Aesthetic Dental PFM Co Cr Crowns Bridge
price:Negotiable
Nissan Versa Lower Control Arm
price:Negotiable
Stationary Asphalt Mixing Equipment
price:Negotiable
1500 Asphalt Mixture Mixing Equipment-gas Type
price:Negotiable
Absorbent with Leak Proof Disposable Female Dog Diapers
price:Negotiable