Emulsified oil for hydraulic support

This product is based on refined base oil as the carrier, adding emulsifier, rust inhibitor, lubricant and other additives.

 

Performance Characteristics

Adopt non-toxic formula, no sulfur, chlorine, phosphorus harmful extreme pressure additives.

The emulsion stability is good, the average particle size is less than 10 nm, the emulsion is not easy to stratification and oil and water separation phenomenon.

Outstanding lubrication ability, can meet the use of various types of hydraulic support requirements.

Environmental adaptability is strong, no bacteria, fungi, no rot, no odor.

 

Product Model Description

H FAE XX--X

Specified use concentration

Applicable water hardness level

High water cut hydraulic fluid type

 

Precautions

The water used to prepare emulsified oil shall meet the following requirements: the water is colorless, odorless, free of suspended solids and mechanical impurities; The pH value range is 6-9, the chloride ion content in water is not more than 200mg/L, and the water hardness and sulfate ion content are not greater than the hardness and sulfate ion content corresponding to the selected model.

The ratio of emulsion concentration is too lower than the standard will reduce the hard water resistance, rust resistance, stability and lubricity.

Do not put emulsified oil into eyes and mouth. In case of accidental contact, wash with plenty of water immediately and seek medical attention if necessary. This product cannot be used as a cleaning agent.

http://www.sanjinglube.com/